LWZH Barn Door 5FT/6FT/7FT/9FT Black Rustic Carbon Steel Sliding Barn Door Interior Three Leaves Shaped Roller for Single Door

LWZH Barn Door 5FT/6FT/7FT/9FT Black Rustic Carbon Steel Sliding Barn Door Interior Three Leaves Shaped Roller for Single Door

Out of stock

SKU: 15080031-4ft-1210mm

$948.99 $392.10

PLS NOTE: ONLY the hardware kit is for sale, door panel is not included. This hardware kit is for single door.

Please make sure your wall is strong enough to hang heave door panel before buying.

Easy to Install:All accessories and step-by-step instructions with pictures included.

Long Sliding Rail: High quality steel for high weight capacity.

Sliding Rollers:Quality bearing steel keep the wheels run smoothly in track.

Sliding barn door hardwareis popular to be installed in bedroom, study room, living room, kitchen, bathroom, closet etc. which can match with different styles and different colors of doors for the simple and artistic style.

Push-pull opening and closing way saves lots of space which is quite suitable for modern decoration style.

Due to the simple design of the slide, no installation experience is needed, just follow the simple installation instructions.

Choose Door Width and Sliding Roller

1) Confirm Door Width

Single Door: Door Width=Door Opening Width+100mm

Double Door: Door Width=(Door Opening Width+100mm)/2

Example:

Single door opening width 800mm, door width at least needs to be 900mm

Double door opening width 1500mm, door width at least needs to be 800mm

Notice: Please note 100mm is the least to add.

2) Confirm Length of Sliding Rail

Single Door:Sliding Rail Length > Door Width*2

The clearance from the top of the door to the ceiling is about 6";

The clearance between door panel and wall is about 5/8" if take 1 3/5" thick door for example;

Installation Instructions:

1. Measure the Wall and Drill Holes

Different sliding rail sizes require different measurements and hole quantites, please measure first and use a pencil mark on the wall.

Then you can drill holes as suggested. Please note percussion bit size for wooden door is Φ5mm and concrete wall is Φ10mm.

2. Install Anchoring Screws (Concrete Wall)

NOTE！Wooden Wall: Use the hammer to punch the screw in, then use the wrench to twist the screw until it is fixed.

3. Install Sliding Rail

4. Install the Sliding Roller

Find the sliding roller you have first, measure size and draw lines as below pictures.

Mark the place where you need to drill the holes.

Then drill holes accordingly and fix the screws to finish the installation of sliding roller.

5. Install Anti-Jump Disk

(1) Put the anti-jump disk to the edge of the door and fix it first
(2) Then spin it to the center of the door and screw the disk

6. Install Floor Guide and Adjust Door Stops
Position: 25mm from the wall to the center line of the floor guide holes. Distance between the wall and inside holes is 24mm.
Measurements: Two holes, distance 24mm, use a Φ6mm bit, hole depth 30mm.

7. Tools Needed

Certification: NONE
Origin: CN(Origin)
Surface Finishing: Painted
Main Material: Steel
Frame Material: Aluminum Alloy
Model Number: GBS-4-L ~ GBS-96-L
Charge Unit: Set
Open Style: Sliding
Opening Method: Push and Pull
Position: Interior
Type: Sliding Doors
Sliding Door Type: Partition Doors
Door Material: Solid Wood
Door Type: Polymer
Color: Frosted Black
Origin: China
Condition: Brand New
Wood door thickness: 35mm-45mm
Wood door width: 450mm- 1400mm
Door Weight Capacity: Maximum 200lbs doors are supported.
Sliding rail thickness: 3/13" (6mm)
Sliding rail width: 1 4/7"(40mm)
Hardware Kit Weight: 3kg ~ 10kg
Door panel: not included

Please allow up to 3-8 weeks to have this global sourced item sent direct to your address, as there is some disruption to the overall freight company's involved, so please allow plenty of time when ordering this product.. Good things are worth waiting for. Please contact shop@rummages.co.nz if you have any questions